Category Archives: Uncategorized

concept sketch 01

MLS Diffuser

1000Hz Quadratic Residue Diffuser

Diffusion, in acoustics and architectural engineering, is the efficacy by which sound energy is spread evenly in a given environment. A perfectly diffusive sound space is one that has certain key acoustic properties which are the same anywhere in the space. A non-diffuse sound space would have considerably different reverberation time as the listener moved around the room. Virtually all spaces are non-diffuse. Spaces which are highly non-diffuse are ones where the acoustic absorption is unevenly distributed around the space, or where two different acoustic volumes are coupled. The diffusiveness of a sound field can be measured by taking reverberation time measurements at a large number of points in the room, then taking the standard deviation on these decay times. Alternately, the spatial distribution of the sound can be examined. Small sound spaces generally have very poor diffusion characteristics at low frequencies due to room modes.

Diffusors (or diffusers) are used to treat sound aberrations in rooms such as echoes. They are an excellent alternative or complement to sound adsorption because they do not remove sound energy, but can be used to effectively reduce distinct echoes and reflections while still leaving a live sounding space. Compared to a reflective surface, which will cause most of the energy to be reflected off at an angle equal to the angle of incidence, a diffusor will cause the sound energy to be radiated in many directions, hence leading to a more diffusive acoustic space. It is also important that a diffusor spreads reflections in time as well as spatially. Diffusors can aid sound diffusion, but this is not why they are used in many cases; they are more often used to remove coloration and echoes.
Diffusors come in many shapes and materials. The birth of modern diffusors was marked by Manfred R. Schroeders’ invention of number theoretic diffusors back in the 1970s.

Maximum Length Sequence Diffusors
Maximum length sequence based diffusors are made of strips of material with two different depths. The placement of these strips follows an MLS. The width of the strips is smaller than or equal to half the wavelength of the frequency where the maximum scattering effect is desired. In ideal situations small vertical walls should be placed between lower stripes, improving the scattering effect in the case of tangential sound incidence. The bandwidth of these devices is rather limited, one octave above the design frequency they behave like a flat surface.

Quadratic-Residue Diffusors
MLS based diffusors are superior to geometrical diffusors in many respects; they have limited bandwidth. The new goal was to find a new surface geometry that would combine the excellent diffusion characteristics of MLS designs with wider bandwidth. A new design was discovered, called a quadratic-residue diffusor. Today the quadratic residue diffusor or Schroeder diffusor is still widely used. Quadratic-Residue Diffusors can be designed to diffuse sound in either one or two directions. They too suffer from “flat plate” frequencies, but at a higher frequencies than MLS diffusors.[citation needed] Fractal constructions can be used to extend bandwidth.

Primitive-Root Diffusors
Are based on a number theoretic sequence. Although they produce a notch in the scattering response, in reality the notch is over too narrow a bandwidth to be useful. In terms of performance, they are very similar to Quadratic-Residue Diffusors.

Optimized Diffusors
By using numerical optimisation, it is possible to improve of number theoretic designs, especially for diffusors with a small number of wells per period. But the big advantage of optimisation is that arbitrary shapes can be used which can blend better with architectural forms.

Two Dimensional (“Hemispherical”) Diffusors
Designed, like most diffusors, to create “a big sound in a small room,” unlike other diffusors, two dimensional diffusors scatter sound in a hemispherical pattern. This is done by the creation of a grid, whose cavities have wells of varying depth, according to the matrix addition of two quadratic sequences equal or proportionate to those of a regular diffusor. These diffusors are very helpful for controlling the direction of the diffusion, particularly in studios and control rooms.


ACTIVITY/USE CONCEPT: amplify the contrast between feral Detroit and ‘civilized’ Detroit

-feral dog feeding station


-peregrine falcon aiery

-feral animal final resting place

-game processing station

-goat milking station

-breast feeding station

-game bird blinds

-feral animal underground railroad stops


-look at existing pathways/greenways est by the city

-identify significant concentrations of vacant land

-speculate which areas could be connected

-select sites that are at the edge of or implicated in densely human areas